| | |
|
|
|
|
Flip the 64 over. There are three screws at the bottom front. remove these. Viewed: 204 times.
|
Flip it over, and carefully hinge open the case. Viewed: 191 times.
|
You can see the three tabs in the back, the keyboard cable, and the power LED cable, coming through the slit in the shielding Viewed: 180 times.
|
| | |
| | |
|
|
|
|
The keyboard connector is easy to get to, and easy to insert/remove Viewed: 189 times.
|
While re-assembling, be sure to thread this power LED cable through the slit in the shielding. Viewed: 179 times.
|
Disconnect the keyboard cable, and flip the top over to the side. Viewed: 208 times.
|
| | |
| | |
|
|
|
|
you can now easily remove the power cable from the mainboard Viewed: 187 times.
|
Here we can see the keyboard mounted to the top of the case. There are 8 screws holding it in place. Viewed: 194 times.
|
After those 8 screws are removed, the keyboard assembly comes right out. Viewed: 219 times.
|
| | |
